[email protected]

A572 CARBON In Stock Castle Metals Site

Carbon A572 (ASTM A572) is a low alloy, high strength steel, popular for its strength. With a better strength to weight ratio, A572 steel is a natural step up from A36 when more strength is needed. The increased strength of A572 plate does not compromise the steels ductility and weldability. A572 plate can therefore be formed, welded, and machined. ASTM A572 / A572M - 15 Standard Specification for High 1.1 This specification covers five grades of high-strength low-alloy structural steel shapes, plates, sheet piling, and bars. Grades 42 [290], 50 [345], and 55 [380] are intended for riveted, bolted, or welded structures. Grades 60 [415] and 65 [450] are intended for riveted or bolted construction of bridges, or for riveted, bolted, or welded construction in other applications.

ASTM A572 GR.50 WIDE FLANGE BEAM - beststeelhome

Wide-flange shapes are available in grade ASTM A992, [4] which has generally replaced the older ASTM grades A572 and A36. Ranges of yield strength:A36:36,000 psi (250 MPa) A572:42,00060,000 psi (290410 MPa), with 50,000 psi (340 MPa) the most common; A588:Similar to A572; A992:50,00065,000 psi (340450 MPa) ASTM A572 Grade50,55,60 HSLA Structural Steel Plate-AGICOASTM A572 Carbon Steel Plate. ASTM A572 Specification refers to High-Strength Low-Alloy Steel Plate for structural building, among the 5 steel grades of 42, 50, 55, 60 and 65, Grade 50 is one most common steel in applications where need more strength and less weight, use steel plate of this grade other than ordinary carbon steel will make the steel structure with same steel strength but ASTM A572 Steel Plate - A572 Grade 42, 50, 55, 60, 65 ASTM A572 Specifications. A572 is the standard specification for high-strength low alloy columbium-vanadium structural steel. Lists five chemical recipes and five different mechanical property ranges for plate products (grades 42, 50, 55, 60, and 65). Relatively wide chemical and property ranges. Grade 50 high volume. Strength, Yield Strength ksi (MPa), Tensile Strength ksi (MPa):Strong, 60-80 (415-550)

Carbon & Alloy Steel

We can supply Carbon Steel in the proper grade, ASTM standard and quantity to meet your all of your requirements. Carbon Steel Beams A992 / A572 Gr 50 Carbon Steel Plate A36/ A572 Gr 50 / A588 / A514 T1 Carbon Steel Tube A500 Gr B & C / A513 Carbon Steel Rebar A615 Gr 40 & Gr 60. Carbon ASTM standard A572 Grade 60 structural mechanical With the movement of the beam on the material such as ASTM standard A572 Grade 60, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials. Carbon Channel - RyersonMost sizes are produced to A572 Gr. 50. Many are Certified to ASTM A36. Some sizes are certified to ASTM A572 Grade 50. Stock Lengths:20, 40 and 60 Ft. Many sizes available from the West Coast in 30 and 50 ft. lengths. Contact a Ryerson representative for more information

GUIDELINES FOR FABRICATION AND WELDING OF

strength structural steel HISTAR ASTM A913 Grade 65. (450 MPa) Only general fabrication guidelines can be given at this point. In special cases a consultation of the steel producer is recommended. 2. Fabrication guide-lines for:2.1 Flame cutting Beams of HISTAR A913 Grade 65 can be cut with a torch, using the process normally STEEL INDUSTRY EMBRACES A992 - AISCCarbon, max Refer to ASTM A572 Manganese 0.50 - 1.50 a Silicon, max Refer to ASTM A572 Vanadium b Refer to ASTM A572 Columbium b Refer to ASTM A572 Phosphorous, max 0.035 Sulfur, max 0.045 Element Composition, % Copper, max 0.60 Nickel, max 0.45 Chromium, max 0.35 Molybdenum, max 0.15 a Minimum manganese for Group 1 shapes is 0.30%. The ratio Steel Reference GuideASTM A572 - High-Strength Low-Alloy Structural Steel This specification covers high-strength structural quality shapes generally suitable for use in riveted, bolted, or welded construction, and for general structural purposes.

A572 Structural, Carbon & HSLA Steel Plate - Chapel Steel

ASTM A572 A high-strength low-alloy steel plate that is utilized in a variety of structural applications. This specification is produced in Grades 42, 50, 55, 60 & 65, the grades representing the yield strength. Plates that are 4 and thicker are made to a 42 KSI yield, although material can be modified to reach the 50 KSI min yield.